Chem - Tex  Corporation
Fine Chemical For A Better Tomorrow

Chemical Products
MOCA

Curing Agent  -  4.4'-Methylene-Bis-(2-Chloraniline)
MOCA, elastomer, pu, wheel, roller, scoter, skate, castor, pipeline pigging, polypigs, mining parts, urethane, ISOCROSS, sm, wm, lm, pipeline, pigging,
MOCA
MOCA - brand named ISOCROSS SM-N / -P and ISOCROSS WM, reacts with appropriate prepolymers will create desired property for various polyurethane products e.g. roller-castors, skate wheels, rollers for paper, plywood mills, mining screens, pipeline polypigs, conveyor rollers, etc.  For these products require high abrasion, bearing capacity, cut and tear resistance, heat and noise reduction.  ISOCROSS WM is known as clear MOCA, that is excellent for manufacturing clear part e.g. inline skate wheels or scoter wheels.
MDA

Epoxy Curing Agent -  4.4'-Methylenedianiline
MDA, aerospace, coating, wire, enamel, corrosion, abrasion, insulation, epoxy, curative, aromatic diamine, isocross mda,
MDA
ISOCROSS MDA is a Aromatic Diamine:  It is recommended to use as a curative for epoxy resins, aerospace high performance coating, wire enamel and engineering plastics.  ISOCROSS MDA provides excellent heat resistance that attributes to high-speed abrasion in the air; high corrosion prevention area like deep sea pipeline coating; high voltage wire insulation. 
Polyurethane Polymers

PU Resins for Elastomer
Polyurethane, elastomer, roller, wheel, cable cars' parts, pu hammer, outdoor, gear, SB-230, SB-260, SB-320, SB-600, SB-080, SB-420, SB-630, Sb-800, SB-920, SB-430, SB-400, SB- 410,
Polyurethane
The reaction between Polyurethane polymers and appropriate curing agents (like MOCA, monomeric isocyanates...) becomes one of the most useful materials for its remarkable mechanical properties and they are easy to work with.  Therefore, they have been widely used in various kinds of industries in order to achieve high performance capacities required, e.g. shock and vibration absorbers, mining screens and cyclones, pipeline pigging, rollers, outdoor gears, fishing gears, wheels, castor, off-shore equipment and all others.  
Polyester Polyols
Polyester, polyol, runway, sports, adhesive, flooring, water proofing, sealant, PO-6030, PO-6020, PO-6120, PO-6010, PO-5010, PO-7115, PO-7120, PO-7020, PO-7023, PO-9003, PO-9103,
Polyester Polyol
Polyester Polyol is widely used for urethane coating, adhesives, sealants and elastomers, e.g. CoHaus stone panels for siding, shoes' in and out-sole, sports runway and courts coating, wheels, roller castors, rollers, Plastic parts used in various kind of industries, etc
LCV   (Leuco Crystal Violet)

Colouring Agent  -  Tris (4 Dimenthylaminophenyl) Methane
LCV, Leuco crystal violet, dry film, Tris (4 Dimenthylaminophenyl), Methane, imaging, photoresists, photosensitive, etching, circuits board, computer,
LCV
LCV is an important Colouring Agent (Dye) applied to Photosensitive Layer of Dry-Film Photo resist for confirmation of a developed circuit image obtained through UV ray imaging.  Dry Film are aqueous, processable, negative acting Photoresists, and excellent for fine etching of printed circuits boards.  
PHOTOINITIATORS

UV Curing Agent - UV Inks, Paints, Varnishing & Coating 
photoinitiators, polymerization, clear coating, UV, abs band, ink, paint, varnishing, on cans, printing, SB-PI 703, SB-PI 714, SB-PI 718, SB-PI 777, SB-PI 788, SB-PI 799,
Photoinitiators
UV curing is referring to a special way through which various kind of coatings e.g. IC boards, paint, inks and printings on cans, hardwood and laminating floorings, etc., can be instantly cured by UV ray. 
MOCA, MDA, Polyurethane Polymers, Prepolymers, Polyester polyol, LCV, Photoinitiators.